X

Helpful hints and guides to make the most out of our Apps and Accessories.

How to handle StreamLine Mic

How to handle Made for iPhone hearing aids

How to handle your TV Transmitter

easyTek Support

The easyTek in detail

(1) Multi-function button

(1) Multi-function button

(2) Neckloop antenna

(3) Microphone openings

(4) Status information with LED indicators

(5) Neckloop ports

(6) Volume buttons

(7) Port for audio devices with 3.5 mm jack

(8) Port for FM receiver

(9) Reset button

(10) Micro-USB port for charging

Easy pairing.

Hearing aids: Step 1

Put easyTek around your customer’s neck. Turn easyTek on by pressing (1) until the green LED (4) turns on.

Put easyTek around your customer’s neck. Turn easyTek on by pressing (1) until the green LED (4) turns on.

Hearing aids: Step 2

Put the hearing aids into the ears and turn them on. The green LED (4) flashes briefly and then slowly fades. Now the hearing aids and the easyTek are paired.

Put the hearing aids into the ears and turn them on. The green LED (4) flashes briefly and then slowly fades. Now the hearing aids and the easyTek are paired.

Bluetooth-enabled devices: Step 1

Turn the easyTek on by pressing and holding (1) for several seconds. If the blue LED (4) does not automatically start flashing, press (1) and and volume button “+” (6) and until it does.

Turn the easyTek on by pressing and holding (1) for several seconds. If the blue LED (4) does not automatically start flashing, press (1) and and volume button “+” (6) and until it does.

Bluetooth-enabled devices: Step 2

Turn on the Bluetooth function of the device you want to pair the easyTek with. Search for easyTek and select it. The blue LED (4) flashes briefly and then slowly fades.

Turn on the Bluetooth function of the device you want to pair the easyTek with. Search for easyTek and select it. The blue LED (4) flashes briefly and then slowly fades.

TV transmitter: Step 1

Turn the easyTek on by pressing and holding (1) for several seconds. Press (1) and both volume buttons (6) simultaneously until the blue LED (4) flashes.

Turn the easyTek on by pressing and holding (1) for several seconds. Press (1) and both volume buttons (6) simultaneously until the blue LED (4) flashes.

TV transmitter: Step 2

Turn the TV transmitter on within 1m of easyTek and wait for the pairing to complete. This takes approximately 2 minutes. The blue LED (4) will stop flashing and remain on.

Turn the TV transmitter on within 1m of easyTek and wait for the pairing to complete. This takes approximately 2 minutes. The blue LED (4) will stop flashing and remain on.

How to handle easyTek

How to handle the easyTek App

How to handle the touchControl App

miniPocket Support

miniPocket in detail

(1) Loudspeaker

(1) Loudspeaker

(2) LED signal indicator

(3) Volume buttons

(4) Key lock

(5) Program change button

(6) On rear side: Battery compartment

(7) On rear side: Opening for key ring

 

How to handle your miniPocket